Related Articles
how to use Tor for hacking
how to use tor for hacking:- Hacking is done for many different reasons. Hacking is highly illegal and needs to be done under safe circumstances. You can use Tor to hack like you can any other application. But, there are more ways that you are going to be able to hack with Tor, it is just going to make it more complex and you will need to have more patience. Just like with any hacking, you are going to need to be diligent and make sure you are not going too fast or else you may get caught. The most obvious first step is going to be that you need to download a Tor Browser. You can go to www.Torproject.org and find a download for the browser. Make sure that you set up your browser and configure it to the way that you are wanting it to be so that it works for you.
how to use tor for hacking
The most common way to set up Tor is to just let it go through its normal set up. Settings can always be changed at a later date. As we talked about earlier, you are going to want to test the Tor network and make sure that you are actually on the network. If you are not on the network, then you are going to get caught being that you are not going to be hiding very well because your IP address is going to be the same IP address that is tied to where you are. You do not want people to know where you are or you are going to lead them right to your front door! Now you are going to enter deepweb.pw onto the Tor browser’s URL bar. You now have access to the deep web services like:
Hidden Wiki, Tails, Tor Search Engines and much more. The hidden wiki is going to give deep web sites that you are going to be able to access when illegal business is being done. Please note that this book is not advocating anything that is illegal. The hacking purposes that are talked about in this book are for educational purposes only. Anything that is done illegally is going to be able to be persecuted under the full extent of the law if and when you get caught. So, it is not advised that you do anything illegal, even if no one can see what it is that you are doing online.
Congratulations, you are now in deep web.
With deep web you can use the tunnels that are associated with Tor to get into other websites. However, you can also add on tools to a browser such as Firefox that are going to make hacking that much easier because not only are they going to hide what you are doing and where you are, but they are also going to make it to where you do not have as many steps to go through when you are trying to hack. These two add ones are Page Hacker and Hack Bar. Both of these add ones will enable you to use traditional hacking skills needed to hack into systems and websites. Here are the traditional steps that you may follow for hacking into a system. The only difference that you are going to see is that you are going to use Tor and the add ones that you now have.
how to use tor for hacking step by step:-
Step One: how to use tor for hacking You’re going to want to use a *nix terminal for all your commands that you’re going to be using when it comes to hacking. Cygwin is a good program that will actually emulate the *nix for those users who use Windows. If you do not have access to Cygwin, then it is best that you use Nmap which will run off WinPCap while you’re still on windows even though you’re not using Cygwin. However, the downside to Nmap is that it will run poorly on the Windows operating system because there is a lack of raw sockets. When you’re actually hacking, you’re most likely going to want to consider using BSD or Linux as both of these systems are flexible no matter what type of system you are using. But, it is important to know that Linux will have more tools that are pre-installed and ultimately more useful to you when it comes to your hacking ventures.
Step Two: make sure that the machine you are using to hack is actually secured. You’re going to need to make sure that you are protected before you go hacking into anyone else’s system. If you are not secured, then there is a possibility that you are going to be traced and they will be able to get hold of you and even file a lawsuit against you because they now know where you are. If you’re hacking a system that is a friend, family members, or a companies, make sure that you do not do so without the permission of the system’s owner. The permission needs to ultimately be handwritten so that there are no repercussions that can come back on you. If you do not feel comfortable attacking someone else’s system, then you always have the option of attacking your own system in order to find your own securities flaws. In order to do this, you’ll need to set up a virtual laboratory to hack. Ultimately, it does not matter what you are trying to hack, if you do not have the permission of the administer Tor, it is illegal and you will get in trouble.
Step Three: you’re going to want to make sure that you can reach the system in which you are trying to attack. You can use a ping utility tool in order to test and see if your target is active, however, the results from this cannot always be trusted. If you are using a ping utility tool, the biggest flaw you will find is that the system administrator will actually be able to turn their system off and therefore causing you to lose your target.
Step Four: you’re going to need to run a scan of the ports on the system that
you’re trying to attack by using p Of or Nmap in order to check and see which ports are actually open on the machine. Along with telling you which ports are open, you’ll also be able to see what type of firewall is being used as well as what kind of router is being used. Knowing this type of information is going to help you to plot your course of action in attacking the system. In order to activate the OS detection using Nmap, you’re going to use the -O switch.
Step Five: Ports such as those that use HTTP or FTP are going to more often than not be protected ports and are only going to become unsecure and discoverable when they are exploited. Ports that are left open for LAN gaming such as TCP and UDP are often forgotten much like the Telnet ports. Any ports that are open are usually evidence of a SSH (secure shell service) that is running on your target. Sometimes these ports can be forced open with brute force in order to allow you access to them.
Step Six: how to use tor for hacking before you are able to gain access to most systems, there is a password that you’re going to have to crack. You are able to use brute force in order to crack the password as one of the ways that you can try and get into a system. When you use brute force, your effort of trying every possible password contained within a pre-defined dictionary is put onto a software program and used to try and crack the password. Being that users of any website or system are highly discouraged from using passwords that are weak and easy to crack, sometimes using brute force can take some time in trying to crack a password. However, there have been some major improvements to the brute force techniques in an effort to lower the time that it takes to crack a password. You can also improve your cracking speed by using cracking algorithms. Many hashing algorithms can be weak and therefore are exploited in using their weakness in order to easily gain access to the system that you are trying to attack.
For example, if you have an MD5 algorithm and cut it in 1/4, you will then have a huge boost in the speed used to crack the password. Graphics cards are also now being used as another sort of processor that you can gain access to. Gaining access to a graphics card is a thousand times faster than it is to crack a password or use an algorithm in order to attack the system. It is highly advised that you do not try and attempted every possible password option when you are trying to access a machine remotely. If you’re going to use this technique, then you’re more than likely going to be detected due to the pollution of the system logs and it will take years to complete. When you’re using an IP address to access a proxy, you’re going to need to have a rooted tablet as well as install a program called TCP scan. The TCP will have a signal that will upload and allow you to gain access to the secure site that you’re trying to attack. In the end, when you look at it, the easiest way to gain access to any system is to find a way that does not require you to have to crack a password.
Step Seven: if you’re targeting a *nix machine, you’re going to need to try and get the root privileges. When you’re trying to gain access to a Windows system, you’re going to need to get the administrator privileges. If you want to see all the files on the system, you’re going to need to have superuser privileges. Having super user privileges allows you to have an account that will give you access as a root user in the Linux or BSD systems. Even if you’re wanting to have access to the most basic kinds of files on a computer, you’re going to need to have some kind of privileges that will allow you to see the files. So, no matter what, if you’re wanting to see anything on a computer, you’re going to need to have some sort of privileges that will allow you to see what is on the network.
These privileges will come from the system administrator. A system that uses a router will allow you to have access to the system by you using an admin account. The only reason that you would not be able to have access to it is if the router password has been changed by the router administrator. If you’re using a Windows operating system, then you’re going to have to have access to the administrator account. Remember that if you gain access to the operating system, that does not mean that you will have access to everything that is on the operating system. In order to have access to everything, you’re going to need to have a root account, super user account, or an administrator account.
Step Eight: how to use tor for hacking there are ways that you can create a buffer overflow so that you can then use in order to give yourself super user status. The buffer overflow is what allows the memory to dump therefore giving you access to inject a code or in order to perform a task that is on a higher level then what you are authorized to do. Software that is bugged usually has a stupid bit set in the Unix system. This system allows a program to execute a task as if it were a different user. Once again it is important that you get the administrators permission in writing before you begin to attack an insecure program on their operating system.
Step Nine: you worked hard to get into the system, you’re going to want to make sure that you do not use up as much time getting back out. The moment that you have access to a system that is an SSH server, you will be able to create what is known as a back door so that you can gain access back to the system whenever you want without spending nearly as much time as you did the first time. A hacker that is experienced is more likely to have a back door in order to have a way in using complied software.
Step Ten: how to use tor for hacking it is vitally important that you do not allow the system administrator to know that you got into their system and that it has been compromised. The way that you can ensure that they do not know is to not make any changes to the website or create more files than what you’re going to need to create. You also should not create any additional users or you’re going to instantly send up a red flag to the administrator. If you are using a patched serve such as an SSHD server, you’re going to need to code your password so that no one can log in using that password. If they happen to log in with that password, they will then have access that they should not have and they will have access to crucial information that you’re most likely not going to want them to have access to.
I hope that you understand my post. if you like this post then share my post, and comment on my post if you have any suggestion or Queries related to how to use tor for hacking. Thank you!
